Plumbing fittings explained: names and what they do

Last updated

Quick answer: Plumbing fittings are the small parts that join, turn, split, shrink or shut off the pipes in your home. Common ones are elbows, tees, couplings, unions, stop valves, the float valve in the roof tank, and the sink and floor traps. If you know the leaking part's name, you can tell a plumber exactly what the job is.

Get quotes
Four labelled fittings: elbow, tee, coupling and valve
Diagram: drawn by Dispatcher, own work, licence held by Dispatcher (image file).

You do not need to learn every part a plumber carries in the van. You only need the names of the parts you can see at home, so your request makes sense the first time.

Fittings that join and turn pipes

These fittings sit along the water pipes. Each one does a single simple job: it joins two pipes, bends the line, adds a branch or changes the size.

FittingWhat it doesHow to spot it
CouplingJoins two straight pipes of the same sizeA short sleeve over a joint in a straight run
ElbowTurns the pipe round a cornerAn L shape, or a softer bend
TeeSplits one pipe into two, or joins two into oneA T shape with three openings
ReducerJoins a wide pipe to a narrower oneOne end fat, the other end thin
UnionA joint with a big nut, so a part can come off without cutting the pipeA ring nut in the middle of the line, often near a pump or heater
AdapterJoins two kinds of end, such as a plain pipe to a screw threadA fitting with a thread on one side only
End capCloses off the end of a pipe that is not usedA blank cap on a pipe stub

The diagram at the top shows four of these: an elbow, a tee, a coupling and a valve. In many homes these shapes come in plastic, copper or another metal. What your pipes are made of is a separate topic, covered in our guide to home pipe materials.

A union is worth knowing by name. When a pump, water heater or filter needs to come out, a plumber undoes the union nut instead of cutting the pipe.

Fittings that control water

Valves start, stop or steer the flow. There are more of them in a home than you might think.

  • Stop valve. It shuts off water in one pipe. Malaysia's plumbing rules define a stop valve as any device, other than a tap, for stopping the flow in a pipe when needed (P.U.(A) 36/2014, gazette copy). The main one sits near your meter. Small ones, often called angle valves, sit under sinks and behind toilets.
  • Ball valve. A valve with a lever. In line with the pipe, it is open. Across the pipe, it is closed. You see these on water heater pipes, filters and outdoor taps.
  • Float valve. It sits where water comes into the roof tank. A float rises as the tank fills and closes the valve when the water is high enough. The same rules say a storage tank's inlet must have one (P.U.(A) 36/2014). Your toilet cistern has a smaller cousin of this valve.
  • Check valve. A one-way valve. On a pump line, it stops water running back when the pump switches off.
  • Backflow preventer. It stops dirty water from flowing back into the clean supply. The rules say an outdoor tap on the main supply pipe needs one fitted before it (P.U.(A) 36/2014).

Fittings on the drain side

Drain fittings carry used water away. Their main trick is the water seal: a little water that stays in a bend and blocks smells coming up from the sewer.

FittingWhere it isWhy it matters
Bottle trapUnder a basin, a round pot shapeIt unscrews at the bottom, so hair and soap can be cleaned out
P-trapUnder a sink, a U bend that turns into the wallHolds the water seal; leaks often start at its nuts
Floor trapIn the bathroom or yard floor, under a grateTakes shower and floor water; smells if it dries out
Wye (Y junction)Where one drain pipe joins another at an angleHelps waste flow one way, so it does not back up the side pipe
Flexible tap hoseBetween the angle valve and the tap or toiletCarries clean water, but it is the part you see beside the drain

The flexible hose is on the supply side, not the drain side. It is in this table because people often mix it up with the trap next to it.

Where you find them at home

Fittings tend to hide in the same few places. Open these spots before you call anyone.

Diagram showing a straight pipe beside a separate fitting
Diagram: drawn by Dispatcher, own work, licence held by Dispatcher (image file).
  • Under the kitchen sink. An angle valve, a flexible hose to the tap, and a bottle trap or P-trap on the waste pipe.
  • Behind the toilet. An angle valve and a short hose feed the cistern. Inside the cistern is the fill valve with its float.
  • At the water heater. Stop valves or ball valves on the pipes going in and out, often with unions. The power side of a heater is an electrician's job, not a plumber's.
  • In the roof tank. The float valve on the inlet, the outlet pipe down to your taps, and a drain valve to empty the tank.
  • At the meter outside. The main stop valve. Close it when you need to shut off water to the whole house.

Your kitchen tap is the odd one out. It is fed straight from the main pipe, while the other taps draw from the tank (P.U.(A) 36/2014). Our guide to how the water pipes in your home work explains that path from the meter to each tap.

What usually goes wrong and what to tell a plumber

Name the part, then describe what it is doing. A plumber can plan the visit from a clear request, often before they arrive.

What you seeLikely partWhat to write
Drip at a joint under the sinkP-trap nut, bottle trap or hose end"Kitchen sink: drip where the hose meets the angle valve"
Water at a ring nut near the pumpUnion"Pump line: union nut leaking, wet all the time"
Valve will not turn or will not shutStop valve or ball valve"Main stop valve near the meter is stuck open"
Roof tank overflow pipe keeps runningFloat valve"Tank overflow runs non-stop, float valve not shutting"
Bathroom smells of drainsFloor trap or bottle trap"Floor trap in the guest bathroom smells, bathroom rarely used"
Hose looks swollen or rustyFlexible tap hose"Toilet hose bulging, want it changed before it bursts"

Then add three more things:

  • Your home type. Landed house, flat or condo, and which floor. In a strata building, a shared pipe may be the building's job.
  • Since when. Today, a week, or on and off. Say if it gets worse when a tap or the pump runs.
  • Photos. Take one wide shot that shows where the part is, and one close-up of the leak with the water running. Keep them on your phone to send when a plumber contacts you.

If water is coming through a ceiling or a wall, read our leaking pipe guide first. If a sink or toilet is backing up, see the blocked toilet or sink guide.

Whose job is it?

It depends on which side of the meter, or which side of the sewer, the fault is on. Here is the split in Selangor, Kuala Lumpur and Putrajaya.

  • A leak inside your home, after the meter. That is yours to fix. Air Selangor, the water supplier, tells customers with a leak inside the home to call a plumber with a permit from SPAN, the national water services regulator (Air Selangor support).
  • A leak at the meter, or on the pipe before it. Report burst or leaking pipes to Air Selangor in its app or on its website (Air Selangor Hydro Hub).
  • No water for the whole street, or a burst main on the road. That is a supply problem. Report it to Air Selangor in its app or on 15300.
  • A shared pipe, pump room or tank in a condo. The JMB or MC, the body that runs the building, looks after the pump house, tanks and pipes up to each unit's meter (Air Selangor meter FAQ).
  • A blocked public sewer or an overflowing manhole on the road. IWK, the sewerage operator, clears public sewer pipes at no charge. A blockage in the private pipe inside your compound is the owner's to clear (IWK domestic customers FAQ).

To find a plumber with a SPAN permit near you, search Air Selangor's Find a Plumber list. Our guide on how to check a plumber's SPAN permit shows what to ask for.

Get quotes on Dispatcher

Free for homeowners. Describe the job in one short form and we pass it to matched local contractors, who contact you directly.

Dispatcher is a marketplace. It does not do the plumbing work and does not employ plumbers. Dispatcher has not checked the listed businesses' permits yet, so ask to see a SPAN permit before you agree a price.

Wondering why one plumber's price is higher than another's? The plumber cost guide explains what goes into it. For the kinds of jobs a plumber takes on, see plumbing work explained, or browse plumbing services.

Sources

Frequently asked questions

What is the fitting under my sink called?

The bent pipe on the waste side is a trap. A round pot is a bottle trap, and a U bend is a P-trap. Both hold a little water that blocks drain smells. The small tap on the wall pipe is an angle valve, and the bendy pipe from it to your tap is a flexible hose.

What is the difference between a tee and an elbow?

An elbow has two openings and turns a pipe round a corner. A tee has three openings and splits one pipe into two, or joins two into one. If a leak is at a T-shaped joint, tell the plumber it is a tee, and say which pipe it feeds, such as the shower or the kitchen.

Can I change a tap hose myself?

A simple swap is a small job: close the angle valve, then change the hose for one of the same type and size. Stop if the valve will not close or the pipe behind it moves. A leak in the pipes after your meter is a job for a plumber with a SPAN permit, not a home fix.

Why does my floor trap smell?

A common cause is a dried-out water seal, when the drain is rarely used. Pour some water down it and see if the smell goes. If it comes back fast, the trap may be cracked or blocked, or the pipe behind it may be faulty. Ask a plumber to check it, and say which bathroom it is in.

Who fixes a leak at the meter?

Report a leak at or before the meter to Air Selangor, the water supplier, in its app or on its call centre line. Pipes after the meter are yours, so a leak there needs a plumber with a SPAN permit. If you live in a condo, check with your JMB or MC first, as shared pipes are theirs.

Has Dispatcher checked plumbers' permits?

Not yet. Dispatcher has not checked the SPAN permits of the businesses listed on the site. Ask any plumber to show the permit before work starts. You can also search Air Selangor's public Find a Plumber list, which shows plumbers with SPAN permits by area.

Know the part that is leaking? Get quotes