Water pipe materials at home: PVC, PPR, copper and GI
Last updated
Quick answer: Many Malaysian homes mix plastic and metal pipes. PVC is often used for cold water and drains, while hot water runs in heat-rated plastic such as PPR, or in copper. Some older homes still have GI (galvanised iron) pipes. Watch for rust, brown water, green crust and damp joints, then ask a plumber to check.
Get quotesThis page is for the moment before a repipe, a water heater job or a renovation, when you want to know what is behind your walls. It does not list prices, life spans or heat limits. Pipe sellers often disagree on those figures, and we only print a number when we can point to its source.
The main pipe materials at a glance
Each material has places where it usually turns up, and its own signs of trouble. Use this table to match what you can see.
| Material | What it looks like | Where you often find it | Signs of trouble |
|---|---|---|---|
| PVC (or uPVC) | Rigid plastic, often grey or white, with glued sleeve joints | Cold water pipes, drains, outside runs | Cracks, a drip at a glued joint, sagging where it is not clipped |
| PPR | Plastic, often green, white or grey, with thick joints melted together | Hot and cold pipes inside the home, often to heaters | A drip at a joint that was not fused well, or a damp patch where it runs in a wall |
| Copper | Orange-brown metal that turns dark or green with age | Hot water lines, some older homes | Green crust at joints, tiny pinhole leaks, wet patches |
| GI (galvanised iron) | Dull grey metal with screw-thread joints | Some older homes, outside walls, roof tank pipes | Rust stains, brown water, weak flow, leaks at threads |
| Flexible hose | Braided metal or plastic tube | The short link from a valve to a tap, toilet or heater | Swelling, rust on the braid, drips at the nut |
For the names of the joints and valves on these pipes, see our guide to plumbing fittings.
How to tell which pipe you have
Look where the pipe is out in the open. You usually do not need to open a wall.
- Check the usual spots. Under the kitchen sink, beside the water heater, at the roof tank and near the meter outside. Our guide to how the water pipes in your home work shows where these sit.
- Look at the colour. Plastic is grey, white or green. Copper is orange-brown, or dark with green marks. GI is a flat metal grey, often with rust spots.
- Look at the joints. A glued sleeve points to PVC. A thick collar that looks melted on points to PPR. Screw threads with rust usually mean GI.
- Try a fridge magnet. It sticks to iron pipe. It does not stick to copper or plastic.
- Take a photo. Show it to the plumber when they contact you, and ask them to name the material in their quote.
Hot water lines: what to ask
Not every pipe is made for hot water, so ask before any hot water pipe is laid. Ask the plumber which pipe they plan to use, and to confirm it is rated for hot water.
A water heater job usually has two sides. The pipes are plumbing work. The power supply is electrical work. Suruhanjaya Tenaga (ST), the Energy Commission, tells homeowners to use a water heater with the ST-SIRIM label, use a hose that is not metal, and protect the heater with a 10mA safety switch (RCD) in the distribution board. It also says to hire an ST-registered contractor for any electrical work at home (ST safety tips, PDF).
If you are adding or changing a heater, see the water heater installation page.
Older homes and rusty pipes
Brown water does not always mean old pipes. Air Selangor, the water supplier, says minerals settle in its own mains and get stirred up when pressure or flow changes. Inside your home, it names the water tank, ageing pipes and filter backwash as causes (Air Selangor water quality page).
Air Selangor's tips are simple. Check its app for supply work near you. Run the tap for 5 to 10 minutes until it clears, and contact Air Selangor if it does not. Ask your neighbours if their water is brown too. If theirs is clear, look at your own plumbing (Air Selangor water quality page).
Your kitchen tap gives a useful clue. Under the 2014 plumbing rules, the kitchen tap takes water from the incoming service pipe, and the rest of your taps take it from the storage tank (P.U.(A) 36/2014, gazette copy). If the kitchen tap runs clear but the bathroom taps run brown, tell your plumber. It points them to the tank and the pipes after it.
With GI pipe, the signs of rust tend to show up slowly: rust stains at the joints, brown water from tank-fed taps, and weaker flow. None of these alone proves a pipe must go. A plumber can tell you if one section needs replacing or if the whole run does. Ask them to list which pipes, which material and how the walls or floor will be opened.
Drain pipes are a different job
Drain pipes carry used water away by gravity, not by pressure. That is why a drain fault shows up as a smell, a slow sink or water backing up, not a spray.
Drains inside the home are often plastic. If yours is blocked rather than leaking, start with our blocked toilet or sink guide. Outside the house, the split changes at the public sewer. IWK, the sewerage operator, says it clears public sewer blockages at no charge, but the owner pays to clear the private pipe that runs from the home to that sewer (IWK domestic customers FAQ).
Whose job is it?
Air Selangor says consumers are responsible for the pipes inside their own property (Air Selangor Hydro Hub). Here is who to call in Selangor, Kuala Lumpur and Putrajaya.
- A leak in your home, after the meter. This one is yours. Air Selangor's advice is to hire a plumber holding a SPAN permit (SPAN is the national water services regulator) (Air Selangor support).
- A leak at the meter or before it, or no water on the whole street. Report it to Air Selangor in its app, on its website or on 15300 (how to report).
- Shared pipes in a condo. In a strata building, the JMB or MC runs the pump house, the tanks and the pipes that lead to every unit's meter (Air Selangor meter FAQ). Ask them before you change any pipe in a strata unit.
Planning a full repipe? The 2014 plumbing rules say anyone who alters or extends a water supply must have a storage tank between the meter and all taps, except the kitchen tap (P.U.(A) 36/2014). A plumber with a SPAN permit should plan the new layout around that.
You can search Air Selangor's Find a Plumber list for plumbers with SPAN permits, or read how to check a plumber's SPAN permit.
Get quotes on Dispatcher
Free for homeowners. Describe the job in one short form and we pass it to matched local contractors, who contact you directly.
Dispatcher only connects you with local businesses. It has no plumbers of its own and does not carry out any work. It has also not checked anyone's SPAN permit yet, so ask the plumber for it before you say yes to a quote.
In your request, say which pipe material you think you have, where the problem is, and whether it is a repair or a repipe. Planning a bigger job? Our guide to plumbing in a renovation covers the order of work. To see why two plumbing prices can differ, read the plumber cost guide, and a leak that is already spreading has its own leaking pipe guide.
Sources
- Air Selangor water quality and discoloured water page. Copy kept from 13 November 2026.
- Air Selangor pages used for who to call: leaks in the home, call centre, reporting post, meter migration FAQ (PDF) and Find a Plumber list. Checked between 3 and 13 November 2026.
- Water Services Industry (Water Reticulation and Plumbing) Rules 2014, P.U.(A) 36/2014, the PBA-hosted gazette copy, for the storage tank and kitchen tap rules (copy saved 5 November 2026).
- Suruhanjaya Tenaga safety and energy efficiency tips (PDF): water heater advice. Copy kept from 3 November 2026.
- IWK domestic customers FAQ, on public and private sewer pipes (copy saved 5 November 2026).
Frequently asked questions
Is PVC pipe OK for hot water?
Ask first, because not every pipe is made for hot water. Ask your plumber which pipe they plan to use on the hot lines, and to confirm it is rated for hot water. We do not give heat limits here, because sellers' figures do not agree. A good quote names the pipe material for each line.
What is PPR?
PPR is a type of plastic pipe. Its joints are fused with heat, so the pipe and fitting melt into one solid piece instead of being glued or screwed. Plumbers often use it for hot and cold lines inside the home. Ask your plumber to confirm that the pipe they quote suits the job, mainly for hot water.
Why is my tap water brown?
It can come from the water mains or from your home. Air Selangor says to check its app for supply work nearby, let the tap run until it clears and ask your neighbours. If only your home has brown water, Air Selangor names the water tank, ageing pipes and filter backwash as likely causes inside the home.
Should I replace old GI pipes?
Not always, and not all at once. Look for the signs: rust stains at joints, brown water from tank-fed taps, weak flow or leaks at the threads. If you see them, ask a plumber to check which sections are affected. They may replace one run or suggest a wider repipe, and the quote should say which.
Who fixes a leak before the meter?
Contact Air Selangor, the water supplier, through its app, on its website or through its call centre. Air Selangor says the pipes inside your own property are yours to look after, so a leak after your meter needs a plumber with a SPAN permit, hired and paid by you.
Has Dispatcher checked plumbers' permits?
Not yet. No listed business on Dispatcher has had its SPAN permit checked so far. That makes it your step: ask to see the permit before any pipe is cut. Air Selangor also runs a public Find a Plumber list where you can look up permit holders in your area.
Ready to sort out your pipes? Get quotes